Engg. Drawing IMP questions.

ENGINEERING DRAWING !!!

1. A POINT IS 30 mm IN FRONT OF THE VP,50 mm ABOVE THE HP AND 20 mm IN FRONT OF A PROFILE PLANE WHICH IS TO THE RIGHT OF THE OBSERVER. DRAW THE VIEW FROM ABOVE, THE VIEW FROM THE FRONT AND THE VIEW FROM THE LEFT. [5M]
 
2. A POINT IS 50 mm BEHIND THE VP. 30 mm ABOVE THE HP AND 20 mm FROM THE PROFILE PIANE. DRAW THE THREE PRINCIPAL VIEWS OF THE POINT. [5M]

3. A POINT IS 50 mm BEHIND THE VP, 30 mm BELOW THE HP AND 20 mm FROM THE PROFILE PLANE .DRAW THE THREE PRINCIPAL VIEWS OF THE POINT. [5M]

4. A POINT IS EQUIDISTANCE FROM THE THREE PRINCIPAL PLANES. THE VIEW FROM ABOVE IS BELOW XY AND THE VIEW FROM FRONT ABOVE XY .THE LINEAR DISTANCE BETWEEN THE ABOVE TWO VIEWS MEASURES 80 mm. DRAW THE THREE PRINCIPAL VIEWS [5M]

5. THE VIEW FROM THE FRONT OF THE POINT IS 60 mm BELOW XY AND THE VIEW FROM THE ABOVE THE 40 mm XY. DRAW THE THREE PRINCIPAL VIEWS [5M]

6. A POINT IS ON THE VP AND 60 mm BELOW HP. DRAW THE PROJECTIONS IF IT IS 30 mm AWAY FROM THE PROFILE PIANE .STATE THE QUADRANT IN WHICH THE POINT LIES. [5M]

7.A POINT IS LYING ON THE HP AND 30 mm AWAY FROM THE VP. DRAW THE PROJECTIONS IF IT IS ALSO 40 MM FROM THE PP. [5M]

8.A POINT IS LOCATED IN THE SECOND QUADRANT BEHIND VP. WHILE ONE OF THE VIEWS IS ON XY, ANOTHER VIEW IS 60 mm ABOVE XY. DRAW THE THREE PRINCIPAL VIEWS [5M]

 9.A POINT IS 30 mm AWAY FROM HP AND 70 mm AWAY FROM THE VP.DRAW THE PROJECTIONS WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS. [5M]

10. A POINT IS LYING ON THE HP AND 50 mm AWAY FROM THE VP. . DRAW THE PROJECTIONS . WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS [5M]

11. A POINT IS LYING ON THE VP AND 60 mm AWAY FROM THE HP. DRAW THE PROJECTIONS . WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS [5M]

12. A POINT IS LOCATED IN FIRST QUADRANT AND THE VIEW BELOW XY IS 50 mm FROM IT.IF THE POINT WERE TO BE IN THE THIRD QUADRANT THE VIEW BELOW XY WOULD BE 30 mm FROM IT. DRAW THE PROJECTIONS OF THE POINT. [5M]

13. A POINT P HAS ONE OF ITS VIEW 70 mm BELOW XY. WHEN IT IS IN THE THIRD QUADRANT.IT HAS ONE OF ITS VIEWS 20 mm BELOW XY. DRAW THE PROJECTIONS OF THE POINT WHEN IT IS IN THE SECOND QUADRANT.[5M]

14. A STRAIGHT LINE 80 mm LONG IS INCLINED AT 30^0 TO THE VP AND PARALLEL TO THE HP.THE NEAREST END OF THE LINE IS 30 mm IN FRONT OF THE VP AND 50 mm ABOVE THE HP. DRAW THE PROJECTIONS [5M]

15. A LINE 130 mm LONG IS PARALLEL TO THE VP AND INCLINED AT 60^0 TO THE HP.THE END NEAREST TO THE HP IS 30 mm FROM IT AND 40 mm FROM THE VP. DRAW THE PROJECTIONS [5M]

16. A LINE TOUCHES 100mm LONG PARALLEL TO THE VP AND INCLINED AT 45^0 TO THE PP. ONE OF THE ENDS TOUCHES THE PP,40 mm FROM THE VP. DRAW THE PROJECTIONS [5M]

better to use it as a Check list ;)

Engineering Drawing Material(PPTs)...

Download these PPTs for better understanding of E.D !
Illustrative Explanation about each topic and problems has been given very clearly...
hope you'll find these ppts helpful...:)
follow the links to download the PPTs...
Part 1
Part 2
Part 3
Part 4
for further queries kindly comment below so that we can help you out.
source: Malla Reddy College of Engg. and Tech.

All the Best :)

Wish you All the Best for your MM and ES exam !

Chaitanya Engineering College,Vizag

CHAITANYA ENGINEERING COLLEGE

Established in 2002, Chaitanya Engineering College(CEC) marks yet another effort on the part of the Chaitanya Group is located in an over 50 acre naturally scene idyllic environment near Kommandi in Greater Viskhapatnam. Though a fledgling, the Institute has earned a place of esteem and the patronage of reputed business organizations within a short time. To make the life at CEC pleasant and comfortable for its students, the Campus is provided with the finest facilities and educational resources. The aims, approach and activities of CEC are guided by all its stakeholders and Management - students, industry and the society. The strengths and specialties of CEC are enhanced by its network of renowned institutions and business organizations.

In the dawn of the technological millennium, CEC is poised to seize the opportunities to emerge as a national centre of excellence in the field of engineering.
The College has been Accredited by National Board of Accreditation (NBA), New Delhi.


Chaitanya Engineering College
Chaitanya Valley,
Kommadi Village,
Madhurawada,
Visakhapatnam District .
Andhra Pradesh, India
Ph:- 0891 -2793111

Emai : chaitanya.kommadi@cec.ac.in
WebSite : http://www.cec.ac.in

MM 2nd Sem IMP Questns

These questions have been taken from an unknown source...!
We hope you find it helpful for your preparation :)
All the Best ~!
ZOOM IN for better clarity

ENGINEERING CHEMISTRY 2nd Sem IMPORTANT QUESTIONS !!!

Engineering chemistry external examinations important questions:
(SET-1)
1. State and explain kohlraush’s law. Discuss its significance and applications.
2. Describe the construction and working of calomel & Quinhydrone electrode. Write its merits and demerits.
3. What is fuel cell? Explain construction and working of Hydrogen Oxygen fuel cell.
4. Define the term specific, equivalent and molar conductance.
5. Define corrosion. Explain the mechanism of wet corrosion with example.
6. Explain the factors influencing the rate of corrosion.
7. Describe the sacrificial anodic and impressed current cathodic protection from corrosion.
8. What is paint? Mention the essential ingredients and functions of paints.
9. What is meant by hardness of water? How will you measure hardness of water by EDTA method?
10. Describe cold & hot lime soda softening process with neat diagram. Write its advantages and disadvantages.
11. Describe the principle procedure involved in zeolite process for softening. Write its merits and demerits.
12. Describe ion exchange method of water softening. Write its advantages and disadvantages.
13. Write briefly about boiler troubles (Carry over (priming & foaming), caustic embrittlement & Scale & sludge formation).
14. Define calorific value. How calorific value of a gaseous fuel is determined by Junker’s gas calorimeter.
15. Write a complete description on proximate & ultimate analysis of coal.
16. Explain Fisher-Tropsch’s and Bergius methods for the synthesis of petrol.
17. What is knocking? Define Octane Number and Cetane Number. How it can be improved.
18. Describe analysis of flue gas by Orsat’s method using neat diagram.
19. Explain one component system phase diagram by using one suitable example.
20. Define phase. Explain two component system phase diagram with using one suitable example.
21. With the help of flow diagram explain the manufacture of Portland cement by wet process/dry process.
22. Define lubrication. Explain the mechanism of Boundary lubricants/ Extreme pressure lubricants / Thick film lubricants.
23. Explain properties of lubricants: a) Flash & fire point b) Cloud & pour point c) Flash & fire point d) Viscosity
24. What are refractories & discuss properties of refectories (strength of refractory, pyrometric cone ,thermal-spalling, porosity)
25. Define insulators? What are thermal & electrical insulators? Discuss their characteristics & engineering applications.


SET-2 - IMPORTANT QUESTIONS
1. Write short notes 1. Galvanizing 2. Tinning 3. Electroplating
2. Define polymerization. Write the differences between Additional polymerization-condensation polymerization & thermoset – thermo-plastics.
3. Write in detail about compounding of plastics and their functions.
4. Expalin compression, injection & extrusion moulding process with neat diagram.
5. Write preparation properties and application of following a. P.V.C b. Bakilite c. Nylon d. BUNA-S e. Teflon f. Polyester.
6. What are colloids? Classify colloids.( lyophilic & lyophobic colloids)
7. Give a detailed account on the properties of Colloids. Writes various applications of colloids.
8. Define phase, component, degree of freedom, phase rule equation & what is the significance of phase rule? Discuss its applications & limitations.
9. Define adsorption. Write the differences between physical and chemical adsorption.
10. Describe briefly about Langmuir adsorption isotherm. Write applications of Adsorption.
11. Derive Nernst’s equation. What are reference electrodes? Give an Example
12. Write short notes on standard electrode potential, EMF of cell, concentration cell.
13. Discuss the method of determination of pH of a solution using Glass electrode.
14. What is secondary cell? Describe construction, cell reaction and application of any secondary cell.
15. Distinguish between A. Soft and hard water B. temporary and permanent hardness
C. lime soda, zeolite and ion exchange process
16. Describe desalination of brackish water. A reverse osmosis b. electro dialysis.
17. What is fuel? Classify fuel with suitable examples. Write characteristics of a good fuel?
18. Distinguish between solid, liquid and gaseous fuel.
19. What is meant by calorific values of a fuel. Distinguish gross and net calorific value.
20. Explain the method of determination of C.V of solid fuel by Bomb calorimeter with a neat diagram.
21. Write the mechanism of free radical polymerization.
22. Describe moulding process for fabrication of thermoplastics and thermosetting plastics.
23. Discuss the processing of natural rubber and vulcanization process.
24. Write short notes on micelles and nano technology.
25. Explain with suitable examples the following terms used in the phase rule study of heterogeneous equilibrium. a) Triple point & b) Eutectic point.
26. Write a note on Annealing & hardening.
27. Write in detail an account of heat treatment based on iron-carbon phase diagram & discuss the silent features of Fe – C system.
28. Write the chemical composition of cement. Explain setting and hardening of cement.
29. What is lubricant? Write functions of lubricant.
30. What are refractories. How are they classified give examples.
31. What are super conductors? Write the applications of super conductors.

Note: Read SET-1 ,(25) very important questions.
We are not responsible for errors in the questions, kindly ignore them.
source:jntuworld...

ENGINEERING PHYSICS 2nd Sem IMPORTANT QUESTIONS !!!

ENGINEERING PHYSICS IMPORTANT QUESTIONS
UNIT-1: Quantum Mechanics & Quantum Computing
1. Derive 3-dimensional, time independent Schrodinger wave equation for an electron. (or)
Derive one-dimensional time independent Schrodinger wave equation for an electron.
2. What is the physical significance of wave function?
3. Deduce the expression for energy an electron confined to a potential box of width ‘x’. (or)
Show that the energies of a particle in a potential box are quantized.






UNIT-2: Electron Theory of Metals
1. a. Distinguish b/w Drude Lorentz Theory (Classical Free Electron Theory) and Somerfield’s theory (Quantum Free Electron Theory) of metals.
b. Explain briefly classical free electron theory of metals.
c. What are the salient features of Sommerfeld theory of metals? Explain.
2 a. Define Fermi-level of electron? Explain Fermi-Dirac distribution function of electrons. Explain the effect of temperature on the distribution.
b. Use the Fermi distribution function to obtain the value of F (E) for E-EF= 0.01eV at 200K.
3. a. Discuss the various drawbacks of classical free electron theory of metals and explain the assumptions made in Quantum theory to overcome the drawbacks.
b. Derive an expression for conductivity of a metal on basis of quantum free electron theory.
4. Explain the following
i. Mean free path
ii. Relaxation time and
iii. Drift velocity of an electron in a metal.
iv. Electrical conductivity
v. Fermi energy
d. Assuming the electron-lattice interaction to be responsible for scattering of
conduction electrons in a metal, obtain an expression for conductivity in terms of
relaxation time and explain any three draw backs of classical theory of free electrons.
5. Explain what is electron scattering and resistance?






UNIT-3: Band Theory of Solids
1. On the basis of band theory how the crystalline solids are classified into metals, Semi-Conductors and insulators.
2. a. What is Bloch Theorem? Explain.
b. Discuss with suitable mathematical expression, the Kronig-Penny model for the energies of an electron in a metal.
3. a. Explain the concept of effective mass of electron



UNIT-4: Magnetic Properties
1. a. Explain magnetic susceptibility, magnetic induction and permeability.
b. Explain clearly difference between hard and soft magnetic materials? Write their characteristic properties and their applications.
2. a. Draw the B-H curve for a ferro-magnetic material and identify the retentivity and
the cohesive field on the curve.
3. Derive the Clausius – Mosotti relation.
5. Explain the terms:
i. Magnetic flux density
ii. Magnetic field strength
iii. Magnetization and
iv. Magnetic susceptibility. How they are related to each other?
6. Explain the origin of magnetic moment. Find the magnetic dipole moments due to orbital and spin motions of an electron.
7. Explain the domain and weiss field theory?
8. Explain clearly the classification of Dia, para & ferro magnetic materials.






UNIT-5: Super Conductivity
1. a. Explain in detail the following
i. Meissner effect and
ii. Penetration depth of a superconductor.
2. Explain the critical magnetic field of a super conductor as a function of temperature.
3. a. What is meant by superconductivity?
b. What are Type-I and Type-II superconductors? Compare the differences between them (soft and hard superconductors).
4. a. Write short notes on the applications of superconducting materials.
b. What are “Cooper pairs”? Explain.
5. a. Explain flux quantization.
b. Explain the Josephson Effect in superconductors. Explain in detail the A.C & D.C. Josephson effect.
6. Explain the terms:
Critical Field
Critical Temperature and
Critical current density, relating to superconductivity.
Give the relation between critical field and critical temperature.






UNIT-6: Di-electric Properties
1. Explain the following
1. Di-electric constant.
2. Electric Susceptibility.
3. Electric Polarization.
4. Polarizability.
5. Ferro-electricity.
6. Piezo-electricity.
2. Describe the phenomenon of electronic polarization and obtain an expression for
Electronic Polarizability.
3. Explain electronic polarization in atoms and obtain an expression for electronic
polarizability in terms of the radius of the atom.
4. a. Explain the different types of polarization mechanisms in di-electric materials.
b. What are the important requirements of good insulating materials?
5. Explain the concept of internal field in solids.
6. a. Derive the Clausius –Mossotti relation.
b. Explain the hysteresis properties of ferromagnetic materials.
c. Mention the various properties of para-magnetic materials.
7. Write notes on:
i. Ferro-electricity and
ii. Piezo-electricity.




UNIT – 7: Semi-Conductors
1. a. Write a note on intrinsic semi conductor.
b. Derive an expression for the carrier concentration in N-type Extrinsic semi conductor.
2. a. Write notes on Direct and Indirect band gap semiconductors.
b. Show that for a P-type semi conductor the Hall coefficient, RH = (1/ne).
c. Derive an expression for the number of electron per unit volume in the conduction band of an intrinsic semi conductor.
3. a. Distinguish between Intrinsic and Extrinsic semiconductors with suitable examples.
b. Explain the effect of temperature on resistivity of a semi-conductor.
4. a. Derive the continuity equation for electrons. What physical law is manifested in continuity equation?
b. Derive the expression for the density of holes in the valence band of an intrinsic semiconductor.
5. a. Explain n-type and p-type semiconductors. Indicate on an energy level diagram the conduction and valance band, donor and acceptor level for an intrinsic and extrinsic semiconductors.
b. Explain the detailed mechanism of current conduction in n and p type semi conductors.
6. a. Describe the drift and diffusion currents in a semi conductor. Derive their expressions.
b. Deduce Einstein relation.




UNIT-8: Physics Of Nano Materials
a. Write a detailed note on nanoscience and nanotechnology.
b. Why nanomaterials exhibit different properties? Explain.
2. a. Write the important applications of nanomaterials in medicine.
b. How the physical and chemical properties of nano particles vary with their size?
c. Write the important applications of nanomaterials.
3. a. What are nanomaterials? Explain.
b. Describe the various types of nanotubes.
c. Explain the fabrication of carbon nanotubes.

BEST OF LUCK for your Maths Exam...

M.F.Hussain is DEAD

Birth name Maqbool Fida Husain
Born 17 September 1915
Pandharpur, Bombay Presidency, British India
Died 9 June 2011 (aged 95)
London, England, United Kingdom
Nationality Indian; Qatari[1]
Field Painting, Drawing, Writer
Training Sir J. J. School of Art
Movement Progressive Art Group
Works Mother India; illustrations to Ramayana, Mahabarata
Awards Padma Shri
Padma Bhushan
Padma Vibhushan
Website

http://www.mfhussain.com/

Online Bits for 2nd Mid MM ,JNTU-K

http://hotfile.com/dl/99587249/10c7f0a/mm_prsolutions.pdf.html

World Environment Day

Love your Environment...be proud of it !!!

50 Top Engineering Colleges in India

JNTU-Kakinada...

visit http://www.jntuk.edu.in
JNTU (Jawaharlal Nehru Technological University)

JNTU-K

...was originally ‘The College of Engineering, Vizagpatnam’ at the time of its establishment in 1946. It is now a sprawling campus of 110 acres, green with mango trees in the fast developing Port city of Kakinada, East coast of peninsula India. Kakinada has a rich political literacy and cultural heritage passed on through generations This college became a constituent of the Jawaharlal Nehru Technological University w.e.f 02-10-1972 through an act of legislature along with other sister institutions under the control of the then Director of Technical Education, Government of Andhra Pradesh. Earlier, it was affiliated to Andhra University. In the year 2003 the college has become autonomous.

The College is governed by the rules and guidelines provided by the university from time to time. The Principal is the administrative and the academic Head of the College. He is assisted by the Vice-Principal and the College Academic Committee in academic matters and the Deputy Registrar and the office staff in administrative matters. The day-to-day activities of the college are carried out by budgetary allocation from the University fund.

The entire academic activity in the college is overseen by the highest body called College Academic Council, which has at least one academician of repute and an industrialist on its body along with senior Professors of the college. Also the entire administrative activity is overseen by the highest body called College Governing Council (CGC) headed by the Vice Chancellor of the University.

The college has made rapid strides since its formation and is playing a pivotal role in the technological advances of the region.

All the five engineering departments are provided with RCC roof buildings. Additional accommodation for Electronics and Telecommunications Engineering, Computer Science & Engineering and Electrical and Electronics Engineering departments is being provided through new buildings as annexes to the existing ones. Plans are afoot to accommodate teaching and non-teaching staff in newly constructed quarters in place of present 50 year old sheds.

The college provides hostel accommodation for nearly about 400 boys and 300 girls. Other amenities on the campus include Bank, Post-Office, dispensary, guesthouse, and play fields.

The Research and Development activity in the College got a boost with the procurement of modern and sophisticated equipment under MHRD and AICTE schemes. Academically, the post-graduate programmes introduced in 1971 in each of the available disciplines have undergone changes in course-structure and syllabi to meet the demands of the current needs. A new under-graduate programme in Computer Science and Engineering has been introduced subsequently. Another post-graduate programme is added in each of the disciplines along with one in Computer Science and Engineering. Now, the college has five U.G. Programmes and Nine P.G. Programmes to its credit. In addition the college helps unemployed under-employed diploma and degree holders in Engineering to improve their qualifications through its continuing education programmes.

The college has plans to provide an e-class room on each of Engineering Department. The college follows a continuous method of evaluation for internal assessment and external mode for end-examinations under semester system. Most of the faculty on rolls at present are having Ph.D and a few more are in the process of acquiring. The college, itself, has got the credit of producing a few Ph.Ds through various research schemes within the available resources and those obtained from different funding agencies in addition to several M.Tech, M.S and a few M.Phil degrees. A few funded and sponsored research schemes have been in progress. Members of the teaching faculty have authored a good number of research papers, research reports and text-books. Departments in the college have conducted number of summer schools, seminars, workshops, symposia and conferences. In addition, quite a few collaborative research schemes sponsored by CSIR, CRRI, ISRO, BHEL etc have been/are being carried out.

The main library is situated in a separated block housing more than 54,000 volumes and contributed 12 numbers of journals maintained by two qualified librarians and necessary supporting staff for 12hrs a day for 6 days and 9 a.m to 1.00pm on Sunday. It is undergoing changes for automation. In addition, a book-bank with more than 3000 volumes is at the disposal of students for borrowing by BC, SC and ST categories. These books are procured from the funds provided by the Social Welfare Department. Over and above, each of the Engineering Departments have Departmental Libraries to reduce the burden on the Central Library and for the convenience of staff.

Several working/retired public and private sector organizations are benefited by consulting this college for technical advice. The College, also, made in roads into community development works by helping the local administrative authorities like municipalities, state police, endowments department, in designing drainage systems, traffic and pollution surveys, software development (e-cop) etc. The Civil Engineering department has got its additional accommodation with Rs.68.0 lakhs, half of which is from the amounts earned through consultancy. The Civil Engineering earns about 18 lakhs annually. With a few power projects coming up in the Private Sectors in and around Kakinada, a lot of Geotechnical investigation activity has been undertaken by the Civil Engineering Department. Some of important clients include ONGC, Kakinada Port Project, Sri Shakthi Gas Limited besides World Bank and Asian Development Bank (ADB) Aided Projects. The Mechanical Engineering Department offers consultancy works in the testing of pressure gauges, lubricating oils etc., and mineralogical investigations. The Electrical Engineering Department has been offering services in high voltage testing, calibration of meters, measurement of leakage currents in insulated High Voltage (HV) sticks and ladders and design of heavy current contactors.

The college successfully celebrated its Silver Jubilee in 1971. The college also celebrated its Golden Jubilee grandly during 1995 - 1996. With the help of funds raised through the contributions from the Alumni, a Golden Jubilee block (Swarnotsav Bhavan) has been constructed on the campus mainly to encourage Research & Development activities. The college has presently entered into the Diamond Jubilee year. The celebrations from July 2005 - July 2006 will be land marked with academic and cultural activities.

This is not just an engineering school but a student school which gives you the opportunity to do groundbreaking, fundamental research.

The college has a Placement and Training cell and every year a good number of students benefit in securing employment in reputed organizations.

In addition to National Cadet Corps (NCC) and National Social Service (NSS) units, there are also technical clubs, a few student wings of professional bodies like the student chapter of IEEE and CSI. Community development programmes will turn a new leaf at JNTU K with ‘Hitaishita’.

Almost all the laboratories have been modernized and obsolete equipment has been replaced under the Modernization and Removal of Obsolescence (MODROBS) scheme of all the All India Council for Technical Education (AICTE).

The college has been admitted to the World Bank Aid through a programme called Technical Education Quality Programme (TEQIP) under which Rs.12 crores aid will be provided. The University has been accredited by the National Board of Assessment and Accreditation Council (NAAC) of University Grants Commission (UGC) with 'A' Grade.

The college has also applied for the accreditation of its various programmes by the National Board of Accreditation (NBA) of AICTE.

A student amenities centre is successfully functioning on the campus with facilities like STD booth, Photocopy Centre, Internet Centre, fancy and bookstore. In addition the State Bank of India and the Postal Department are running their branches on the campus since long. The college provides medical facilities on the campus through a dispensary with a medical officer deputed by the Government of Andhra Pradesh and the supporting staff provided by the college. A new P.G Hostel and additional accommodations for the existing ladies hostel will be the new added facilities for students in the campus. The hostels and dining areas/ food courts have been renovated in a large scale with all modern facilities.

Each department has got its own computer centre. A central internet facility is available in the Electronics and Communication Engineering department with access to both staff and students. In addition, an internet laboratory is attached to Computer Science & Engineering department, apart from separate internet connections to some other departments.

The College has a placement and training cell and every year a good number of students benefit in-securing employment in reputed organizations. Further, due to rapid expansion that has gone by in the field of Technical Education in Andhra Pradesh, about 165 Engineering Colleges have been affiliated to the J.N.T. University out of which this college is entrusted with the responsibility of overseeing the examinations in 165 Colleges in this Zone in the capacity of a Nodal Centre. Under this activity, the college has to interact with these colleges to see that the end-semester examinations in all these colleges are conducted in a fair manner, the answer scripts are valued in different spot centers and marks lists are sent to the university to facilitate the processing and announcement of Results. This shows the role of the college as a lead institution.

The alumni association of the college has got a number of its units spread all over the country and even abroad. These units are functioning independently and organizing activities for themselves. Some of the prominent alumni contributed monetarily and a multi-utility building has come up on the campus from these funds which is housing the Training & Placement office, an educational T.V. programmes receiving centre (MANA TV) and a few unfurnished guest rooms. One of the alumni has instituted an annual award for best teacher as recognized by the students. Another alumnus instituted another award for the best outgoing student from each branch of engineering. An annual get-together is also arranged on the campus by the local alumni association on the first Sunday of every calendar year.

There is an auditorium with an area of about 500 sq.m. attached with an open air theatre for organizing the functions with a gathering of 500. A 60 seated bus is available and used for educational tours and technical visits.