Engg. Drawing IMP questions.

ENGINEERING DRAWING !!!

1. A POINT IS 30 mm IN FRONT OF THE VP,50 mm ABOVE THE HP AND 20 mm IN FRONT OF A PROFILE PLANE WHICH IS TO THE RIGHT OF THE OBSERVER. DRAW THE VIEW FROM ABOVE, THE VIEW FROM THE FRONT AND THE VIEW FROM THE LEFT. [5M]
 
2. A POINT IS 50 mm BEHIND THE VP. 30 mm ABOVE THE HP AND 20 mm FROM THE PROFILE PIANE. DRAW THE THREE PRINCIPAL VIEWS OF THE POINT. [5M]

3. A POINT IS 50 mm BEHIND THE VP, 30 mm BELOW THE HP AND 20 mm FROM THE PROFILE PLANE .DRAW THE THREE PRINCIPAL VIEWS OF THE POINT. [5M]

4. A POINT IS EQUIDISTANCE FROM THE THREE PRINCIPAL PLANES. THE VIEW FROM ABOVE IS BELOW XY AND THE VIEW FROM FRONT ABOVE XY .THE LINEAR DISTANCE BETWEEN THE ABOVE TWO VIEWS MEASURES 80 mm. DRAW THE THREE PRINCIPAL VIEWS [5M]

5. THE VIEW FROM THE FRONT OF THE POINT IS 60 mm BELOW XY AND THE VIEW FROM THE ABOVE THE 40 mm XY. DRAW THE THREE PRINCIPAL VIEWS [5M]

6. A POINT IS ON THE VP AND 60 mm BELOW HP. DRAW THE PROJECTIONS IF IT IS 30 mm AWAY FROM THE PROFILE PIANE .STATE THE QUADRANT IN WHICH THE POINT LIES. [5M]

7.A POINT IS LYING ON THE HP AND 30 mm AWAY FROM THE VP. DRAW THE PROJECTIONS IF IT IS ALSO 40 MM FROM THE PP. [5M]

8.A POINT IS LOCATED IN THE SECOND QUADRANT BEHIND VP. WHILE ONE OF THE VIEWS IS ON XY, ANOTHER VIEW IS 60 mm ABOVE XY. DRAW THE THREE PRINCIPAL VIEWS [5M]

 9.A POINT IS 30 mm AWAY FROM HP AND 70 mm AWAY FROM THE VP.DRAW THE PROJECTIONS WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS. [5M]

10. A POINT IS LYING ON THE HP AND 50 mm AWAY FROM THE VP. . DRAW THE PROJECTIONS . WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS [5M]

11. A POINT IS LYING ON THE VP AND 60 mm AWAY FROM THE HP. DRAW THE PROJECTIONS . WHEN IT IS LYING IN THE FIRST,THE SECOND,THE THIRD AND THE FOURTH QUADRANTS [5M]

12. A POINT IS LOCATED IN FIRST QUADRANT AND THE VIEW BELOW XY IS 50 mm FROM IT.IF THE POINT WERE TO BE IN THE THIRD QUADRANT THE VIEW BELOW XY WOULD BE 30 mm FROM IT. DRAW THE PROJECTIONS OF THE POINT. [5M]

13. A POINT P HAS ONE OF ITS VIEW 70 mm BELOW XY. WHEN IT IS IN THE THIRD QUADRANT.IT HAS ONE OF ITS VIEWS 20 mm BELOW XY. DRAW THE PROJECTIONS OF THE POINT WHEN IT IS IN THE SECOND QUADRANT.[5M]

14. A STRAIGHT LINE 80 mm LONG IS INCLINED AT 30^0 TO THE VP AND PARALLEL TO THE HP.THE NEAREST END OF THE LINE IS 30 mm IN FRONT OF THE VP AND 50 mm ABOVE THE HP. DRAW THE PROJECTIONS [5M]

15. A LINE 130 mm LONG IS PARALLEL TO THE VP AND INCLINED AT 60^0 TO THE HP.THE END NEAREST TO THE HP IS 30 mm FROM IT AND 40 mm FROM THE VP. DRAW THE PROJECTIONS [5M]

16. A LINE TOUCHES 100mm LONG PARALLEL TO THE VP AND INCLINED AT 45^0 TO THE PP. ONE OF THE ENDS TOUCHES THE PP,40 mm FROM THE VP. DRAW THE PROJECTIONS [5M]

better to use it as a Check list ;)